Paprsky.com

Say you truly think that you wish to paint a car then get ready for a full task ahead of you. It does not mean that you cant or shouldnt do it, it just signifies be sure youre ready to see the job done from beginning to end. If you do not finish the job completely or the right way then youre going to be driving something that may be a bit embarrassing to the eye at least.

To paint a car takes careful planning and ensuring that you’ve all of the supplies you require and the time to go through at least a couple of the stages.

There’re things that you are going to need by way of supplies. You will need masking tape, dust mask, goggles, sandpaper, wax/grease remover, primer paint, paper for covering, car wash and detergent, paint sprayer, putty with knife.

When you purchase your sandpaper make sure you purchase fine and thick grit, as you will need both textures. The amount of primer and urethane based paint you require would be dependent on the size of your car. Whether or not you want to utilise a paint sprayer is completely up to you, say you choose not to then the regular spray paint cans will do fine. Be sure you wear proper clothing when you go to paint a car so your skin isnt exposed.

Lastly be sure you have the proper space to work in. You need to be able to work around your car. You most surely need good ventilation, and you’ll need to be able to protect it against the elements.

First off you must actually wash your car well. It doesn’t matter how clean it will look to you unless you just washed it, there’ll be whatever debris on it that you must remove, otherwise the paint will not adhere properly. Then once youve it washed nice and clean youve to get every of the old wax off it so that’s where the wax/greaser remover comes in. It’s really crucial you go through these steps when you go to paint a car.

You’ll in all likelihood notice that you have a couple of rough spots on your latest finish. Say you go to paint a car that is in this condition, you’ll not get good coverage with the new paint. Put little pit marks caused by stones or things like that just use a little putty to fill them in. The use the sand paper to gently smooth the rough spots and small holes. Make sure you rub out all the debris from sanding.

In order to paint a car, you must be very certain that its dry after your washing. This will take a few hours. Be sure it doesn’t get dirty once again. Next masking tape off the areas that you do not want to get paint on.

Totally prime the car. Then sand it gently again. Be sure to wipe the residue off.

Now you are ready to apply the base coat of the new colour. Preferably with a spray gun. Completely spray it and then let it dry for about 15 minutes. And then you could apply the second coat. Most often you could get away with 2 coats.

Let it dry for about 1 hour then you can apply the clear coat. Let dry 15 minutes then re apply. You’ll in all likelihood need about 3 coats of the clear to get a good finish.